The present 3D Dataset contains the 3D model analyzed in the following publication: Solé et al. (2018), Niche partitioning of the European carnivorous mammals during the paleogene. Palaios. https://doi.org/10.2110/palo.2018.022 

Hyaenodon leptorhynchus FSL848325 View specimen

M3#336 The specimen FSL848325 is separated in two fragments: the anterior part bears the incisors, the deciduous and permanent canines, while the posterior part bears the right P3, P4, M1 and M2. The P2 is isolated. When combined, the cranium length is approximatively 10.5 cm long. The anterior part is 6.9 cm long and 2.15 cm wide (taken at the level of the P1). The posterior part is 4.8 cm long. The anterior part of the cranium is very narrow. Type: "3D_surfaces" doi: 10.18563/m3.sf.336   state:published

Download 3D surface file

This contribution contains the 3D models described and figured in the following publication: Gaetano, L. C., Abdala, F., Mancuso, C, and Vega N.2025. New traversodontid cynodont from the Late Triassic Chañares Formation. Publicación Electrónica de la Asociación Paleontológica Argentina. 

Pontognathus ignotus PULR-V 287 View specimen

M3#1647 partial snout preserving the lateralmost incisor, the base of the canine, and several postcanines Type: "3D_surfaces" doi: 10.18563/m3.sf.1647   state:in_press

Download 3D surface file

Massetognathus pascuali PULR-V 289 View specimen

M3#1646 partial lower jaw Type: "3D_surfaces" doi: 10.18563/m3.sf.1646   state:in_press

Download 3D surface file

The present 3D dataset contains the 3D models of the holotype of Proterochampsa nodosa that were built and analysed in “Redescription, taxonomic revaluation, and phylogenetic affinities of Proterochampsa nodosa (Archosauriformes: Proterochampsidae), early Late Triassic of Candelaria Sequence (Santa Maria Supersequence)”. 

Proterochampsa nodosa MCP 1694-PV View specimen

M3#974 3D models of Proterochampsa nodosa. Model 1: skull. Model 2: mandible. Model 3: left mandibular ramus. Type: "3D_surfaces" doi: 10.18563/m3.sf.974   state:published

Download 3D surface file

The present 3D Dataset contains the 3D model of a skull analyzed in “A Puma concolor (Carnivora: Felidae) in the Middle-Late Holocene landscapes of the Brazilian Northeast (Bahia): submerged cave deposits and stable isotopes”. The 3D model was generated by photogrammetry. 

Puma concolor MN 57461 View specimen

M3#843 Cranium Type: "3D_surfaces" doi: 10.18563/m3.sf.843   state:published

Download 3D surface file

The present 3D Dataset contains the 3D models analyzed in Pochat-Cottilloux Y., Martin J.E., Jouve S., Perrichon G., Adrien J., Salaviale C., de Muizon C., Cespedes R. & Amiot R. (2021). The neuroanatomy of Zulmasuchus querejazus (Crocodylomorpha, Sebecidae) and its implications for the paleoecology of sebecosuchians. The Anatomical Record, https://doi.org/10.1002/ar.24826 

Zulmasuchus querejazus MHNC 6672 View specimen

	M3#798 Left endosseous labyrinth of Z. querejazus (MHNC 6672). Type: "3D_surfaces" doi: 10.18563/m3.sf.798   state:published	Download 3D surface file
	M3#799 Reconstruction of the endocranial cavities of Z. querejazus (MHNC 6672). Type: "3D_surfaces" doi: 10.18563/m3.sf.799   state:published	Download 3D surface file
	M3#800 Three-dimensional reconstruction of the pneumatic cavities within the braincase of Z. querejazus (MHNC 6672) Type: "3D_surfaces" doi: 10.18563/m3.sf.800   state:published	Download 3D surface file

This contribution contains the 3D models of the ossicles of a protocetid archaeocete from the locality of Kpogamé, Togo, described and figured in the publication of Mourlam and Orliac (2019). 

indet. indet. UM KPG-M 73 View specimen

	M3#407 stapes Type: "3D_surfaces" doi: 10.18563/m3.sf.407   state:published	Download 3D surface file
	M3#408 Incus Type: "3D_surfaces" doi: 10.18563/m3.sf.408   state:published	Download 3D surface file
	M3#409 Malleus Type: "3D_surfaces" doi: 10.18563/m3.sf.409   state:published	Download 3D surface file

This contribution contains the 3D model described and figured in the following publication: Crochet, J.-Y., Hautier, L., Lehmann, T., 2015. A pangolin (Manidae, Pholidota, Mammalia) from the French Quercy phosphorites (Pech du Fraysse, Saint-Projet, Tarn-et-Garonne, late Oligocene, MP 28). Palaeovertebrata 39(2)-e4. doi: 10.18563/pv.39.2.e4  

Necromanis franconica UM PFY 4051 View specimen

M3#12 A partial left humerus from Pech du Fraysse (Saint-Projet, Tarn-et-Garonne, France), MP 28 (late Oligocene) Type: "3D_surfaces" doi: 10.18563/m3.sf12   state:published

Download 3D surface file

The present 3D Dataset contains the 3D models of an ilium, a vertebra, and a partial scapula of Prestosuchus sp. that were analyzed in “New Loricata remains from the Pinheiros-Chiniquá Sequence (Middle-Upper Triassic), southern Brazil”. 

Prestosuchus sp. UFSM11603 View specimen

M3#1080 Surface scan of a right ilium of Prestosuchus sp. with a 0.4 mm resolution. Type: "3D_surfaces" doi: 10.18563/m3.sf.1080   state:published

Download 3D surface file

Prestosuchus sp. UFSM11233 View specimen

M3#1081 Surface scan of a partial right scapula of Prestosuchus sp. with a 0.4mm resolution. Type: "3D_surfaces" doi: 10.18563/m3.sf.1081   state:published

Download 3D surface file

Prestosuchus sp. UFSM11602a View specimen

M3#1082 Surface scan of a anterior dorsal vertebra of Prestosuchus sp. with a 0.2 mm resolution. Type: "3D_surfaces" doi: 10.18563/m3.sf.1082   state:published

Download 3D surface file

The present 3D Dataset contains the 3D models of brain endocast of traversodontid cynodonts studied in: Pavanatto et al. 2019. Virtual reconstruction of cranial endocasts of traversodontid cynodonts (Eucynodontia: Gomphodontia) from the upper Triassic of Southern Brazil. Journal of Morphology. https://doi.org/10.1002/jmor.21029 

Siriusgnathus niemeyerorum CAPPA/UFSM 0032 View specimen

M3#425 3D model of the brain endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.425   state:published

Download 3D surface file

Exaeretodon riograndensis CAPPA/UFSM 0030 View specimen

M3#426 3D model of the brain endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.426   state:published

Download 3D surface file

Exaeretodon riograndensis CAPPA/UFSM 0227 View specimen

M3#427 3D model of the brain endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.427   state:published

Download 3D surface file

The present 3D Dataset contains two 3D models described in Tissier et al. (https://doi.org/10.1098/rsos.200633): the only known complete mandible of the early-branching rhinocerotoid Epiaceratherium magnum Uhlig, 1999, and a hypothetical reconstruction of the complete archetypic skull of Epiaceratherium Heissig, 1969, created by merging three cranial parts from three distinct Epiaceratherium species. 

Epiaceratherium magnum NMB.O.B.928 View specimen

M3#534 3D surface model of the mandible NMB.O.B.928 of Epiaceratherium magnum, with texture file. Type: "3D_surfaces" doi: 10.18563/m3.sf.534   state:published

Download 3D surface file

Epiaceratherium magnum NMB.O.B.928 + MJSN POI007–245 + NMB.I.O.43 View specimen

M3#535 Archetypal reconstruction of the skull of Epiaceratherium, generated by 3D virtual association of the cranium of E. delemontense (MJSN POI007–245, in blue), mandible of E. magnum (NMB.O.B.928, green) and snout of E. bolcense (NMB.I.O.43, in orange). Type: "3D_surfaces" doi: 10.18563/m3.sf.535   state:published

Download 3D surface file

This contribution contains the 3D model described and figured in the following publication: Dubied, M., Mennecart, B. and Solé, F. 2019. The cranium of Proviverra typica (Mammalia, Hyaenodonta) and its impact on hyaenodont phylogeny and endocranial evolution. Palaeontology. https://doi.org/10.1111/pala.12437 

Proviverra typica NMB Em18 View specimen

M3#355 The file contain the cranium (yellow) and the endocast (blue) of the facial part and the brain case part of the type specimen of Proviverra typica (NMB Em18). Type: "3D_surfaces" doi: 10.18563/m3.sf.355   state:published

Download 3D surface file

The present 3D Dataset contains the 3D models analyzed in the publication: Mummified Paleogene Spirostreptida and Julida (Arthropoda, Diplopoda) from southern France. Papers in Paleontology. 

Protosilvestria sculpta NMB F1935 View specimen

	M3#1457 Paralectotype, 13 diplosegments with the proximal part of the legs Type: "3D_surfaces" doi: 10.18563/m3.sf.1457   state:in_press	Download 3D surface file
	M3#1657 CT data of NMB F1935. Images were reduced by a binning of factor 2. Type: "3D_CT" doi: 10.18563/m3.sf.1657   state:in_press	Download CT data

Protosilvestria sculpta NMB F1936 View specimen

	M3#1458 Lectotype, head with the ten following segments Type: "3D_surfaces" doi: 10.18563/m3.sf.1458   state:in_press	Download 3D surface file
	M3#1658 CT data of NMB F1936. Type: "3D_CT" doi: 10.18563/m3.sf.1658   state:in_press	Download CT data

Protosilvestria sculpta NMB F1937 View specimen

	M3#1459 Paralectotype, seven segments Type: "3D_surfaces" doi: 10.18563/m3.sf.1459   state:in_press	Download 3D surface file
	M3#1659 CT data of NMB F1937 Type: "3D_CT" doi: 10.18563/m3.sf.1659   state:in_press	Download CT data

Protosilvestria sculpta NMB F1938 View specimen

	M3#1460 Paralectotype, ten segments and the telson Type: "3D_surfaces" doi: 10.18563/m3.sf.1460   state:in_press	Download 3D surface file
	M3#1660 CT data of NMB F1938 Type: "3D_CT" doi: 10.18563/m3.sf.1660   state:in_press	Download CT data

Protosilvestria sculpta NMB F1987 View specimen

	M3#1461 Nine segments and the telson Type: "3D_surfaces" doi: 10.18563/m3.sf.1461   state:in_press	Download 3D surface file
	M3#1661 CT data of NMB F1987 Type: "3D_CT" doi: 10.18563/m3.sf.1661   state:in_press	Download CT data

Protosilvestria sculpta NMB F1988 View specimen

	M3#1462 Two parts, first part=telson and four segments, second part=five segments Type: "3D_surfaces" doi: 10.18563/m3.sf.1462   state:in_press	Download 3D surface file
	M3#1662 CT data of NMB F1988 Type: "3D_CT" doi: 10.18563/m3.sf.1662   state:in_press	Download CT data

Protosilvestria sculpta NMB F1989 View specimen

	M3#1463 Telson with 13 segments and the digestive tract Type: "3D_surfaces" doi: 10.18563/m3.sf.1463   state:in_press	Download 3D surface file
	M3#1663 CT data of NMB F1989 Type: "3D_CT" doi: 10.18563/m3.sf.1663   state:in_press	Download CT data

Protosilvestria sculpta NMB F1990 View specimen

	M3#1464 Eight segments and the telson Type: "3D_surfaces" doi: 10.18563/m3.sf.1464   state:in_press	Download 3D surface file
	M3#1664 CT data of NMB F1990 Type: "3D_CT" doi: 10.18563/m3.sf.1664   state:in_press	Download CT data

Protosilvestria sculpta NMB F3743 View specimen

	M3#1465 Seven segments and legs Type: "3D_surfaces" doi: 10.18563/m3.sf.1465   state:in_press	Download 3D surface file
	M3#1665 CT data of NMB F3743. Images were reduced by a binning of factor 2. Type: "3D_CT" doi: 10.18563/m3.sf.1665   state:in_press	Download CT data

Protosilvestria sculpta UM-SND-1704 View specimen

	M3#1468 Head and seven segments Type: "3D_surfaces" doi: 10.18563/m3.sf.1468   state:in_press	Download 3D surface file
	M3#1666 CT data of UM-SND-1704. Images were reduced by a binning of factor 2. Type: "3D_CT" doi: 10.18563/m3.sf.1666   state:in_press	Download CT data

Indet Indet UM-ROQ1-500 View specimen

	M3#1467 Head and ten segments Type: "3D_surfaces" doi: 10.18563/m3.sf.1467   state:in_press	Download 3D surface file
	M3#1667 CT data of UM-ROQ1-500. Images were reduced by a binning of factor 2. Type: "3D_CT" doi: 10.18563/m3.sf.1667   state:in_press	Download CT data