This contribution contains the 3D surface model of the holotype cranium of the Late Jurassic thalassochelydian turtle Solnhofia brachyrhyncha described and figured in the publication of Anquetin and Püntener (2020). 

Solnhofia brachyrhyncha MJSN BAN001-2.1 View specimen

M3#536 Textured 3D surface model of the holotype cranium of the Late Jurassic turtle Solnhofia brachyrhyncha Type: "3D_surfaces" doi: 10.18563/m3.sf.536   state:published

Download 3D surface file

This contribution provides the raw files for the μCT-scan data and renderings of the three-dimensional digital models of two fossil teeth of a geomyin geomorph rodent (Caribeomys merzeraudi), discovered from lower Oligocene deposits of Puerto Rico, San Sebastian Formation (locality LACM Loc. 8060). These fossils were described, figured and discussed in the following publication: Marivaux et al. (2021), An unpredicted ancient colonization of the West Indies by North American rodents: dental evidence of a geomorph from the early Oligocene of Puerto Rico. Papers in Palaeontology. https://doi.org/10.1002/spp2.1388 

Caribeomys merzeraudi LACM 162478 View specimen

	M3#712 Right lower dp4: isolated deciduous premolar. The specimen was scanned with a resolution of 5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. This isolated tooth was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool. Type: "3D_surfaces" doi: 10.18563/m3.sf.712   state:published	Download 3D surface file
	M3#714 5µm µCT data set . Right lower dp4: isolated deciduous premolar. The specimen was scanned with a resolution of 5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). Type: "3D_CT" doi: 10.18563/m3.sf.714   state:published	Download CT data

Caribeomys merzeraudi LACM 162449 View specimen

	M3#713 Right lower molar (m1 or m2). The specimen was scanned with a resolution of 4.5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. This isolated tooth was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool. Type: "3D_surfaces" doi: 10.18563/m3.sf.713   state:published	Download 3D surface file
	M3#715 µCT data at 4.5µm Type: "3D_CT" doi: 10.18563/m3.sf.715   state:published	Download CT data

The present 3D Dataset contains the 3D models analyzed in Mennecart B., Wazir W.A., Sehgal R.K., Patnaik R., Singh N.P., Kumar N, and Nanda A.C. 2021. New remains of Nalamaeryx (Tragulidae, Mammalia) from the Ladakh Himalaya and their phylogenetical and palaeoenvironmental implications. Historical Biology. https://doi.org/10.1080/08912963.2021.2014479
  

Nalameryx savagei WIMF/A4801 View specimen

M3#766 Nalameryx savagei, Partial lower right jaw preserving m2 and m3. Type: "3D_surfaces" doi: 10.18563/m3.sf.766   state:published

Download 3D surface file

Nalameryx savagei WIMF/A4802 View specimen

M3#767 Nalameryx savagei, partial lower right jaw preserving m2 and m3 Type: "3D_surfaces" doi: 10.18563/m3.sf.767   state:published

Download 3D surface file

The present Dataset contains the micro-CT scan of the head of an anonymous 54 year old female donor, at a voxel resolution of 145µm. The skin of the face has been masked in order to avoid the donor to be recognized.
  

Homo sapiens UM_HS_2018_09_13 View specimen

M3#1152 Micro-ct data set Type: "3D_CT" doi: 10.18563/m3.sf.1152   state:published

Download CT data

The present 3D Dataset contains the 3D model analyzed in the publication : On Roth’s “human fossil” from Baradero, Buenos Aires Province, Argentina: morphological and genetic analysis. The “human fossil” from Baradero, Buenos Aires Province, Argentina, is a collection of skeleton parts first recovered by Swiss paleontologist Santiago Roth and further studied by anthropologist Rudolf Martin. By the end of the 19th century and beginning of the 20th century it was considered as one of the oldest human skeletons from the southern cone. We studied the cranial anatomy and contextualized the ancient individual remains. We discuss the context of the finding, conducted an osteobiographical assessment and performed a 3D virtual reconstruction of the skull, using micro-CT-scans on selected skull fragments and the mandible. This was followed by the extraction of bone tissue and teeth samples for radiocarbon and genetic analyses, which brought only limited results due to poor preservation and possible contamination. We estimate that the individual from Baradero is a middle-aged adult male. We conclude that the revision of foundational collections with current methodological tools brings new insights and clarifies long held assumptions on the significance of samples that were recovered when archaeology was not yet professionalized. 
  

Homo sapiens PIMUZ A/V 4217 View specimen

M3#1198 3D virtual reconstruction of the skull Type: "3D_surfaces" doi: 10.18563/m3.sf.1198   state:published

Download 3D surface file

The present 3D Dataset contains the 3D models analyzed in the publication: Mummified Paleogene Spirostreptida and Julida (Arthropoda, Diplopoda) from southern France. Papers in Paleontology. 

Protosilvestria sculpta NMB F1935 View specimen

	M3#1457 Paralectotype, 13 diplosegments with the proximal part of the legs Type: "3D_surfaces" doi: 10.18563/m3.sf.1457   state:published	Download 3D surface file
	M3#1657 CT data of NMB F1935. Images were reduced by a binning of factor 2. Type: "3D_CT" doi: 10.18563/m3.sf.1657   state:published	Download CT data

Protosilvestria sculpta NMB F1936 View specimen

	M3#1458 Lectotype, head with the ten following segments Type: "3D_surfaces" doi: 10.18563/m3.sf.1458   state:published	Download 3D surface file
	M3#1658 CT data of NMB F1936. Type: "3D_CT" doi: 10.18563/m3.sf.1658   state:published	Download CT data

Protosilvestria sculpta NMB F1937 View specimen

	M3#1459 Paralectotype, seven segments Type: "3D_surfaces" doi: 10.18563/m3.sf.1459   state:published	Download 3D surface file
	M3#1659 CT data of NMB F1937 Type: "3D_CT" doi: 10.18563/m3.sf.1659   state:published	Download CT data

Protosilvestria sculpta NMB F1938 View specimen

	M3#1460 Paralectotype, ten segments and the telson Type: "3D_surfaces" doi: 10.18563/m3.sf.1460   state:published	Download 3D surface file
	M3#1660 CT data of NMB F1938 Type: "3D_CT" doi: 10.18563/m3.sf.1660   state:published	Download CT data

Protosilvestria sculpta NMB F1987 View specimen

	M3#1461 Nine segments and the telson Type: "3D_surfaces" doi: 10.18563/m3.sf.1461   state:published	Download 3D surface file
	M3#1661 CT data of NMB F1987 Type: "3D_CT" doi: 10.18563/m3.sf.1661   state:published	Download CT data

Protosilvestria sculpta NMB F1988 View specimen

	M3#1462 Two parts, first part=telson and four segments, second part=five segments Type: "3D_surfaces" doi: 10.18563/m3.sf.1462   state:published	Download 3D surface file
	M3#1662 CT data of NMB F1988 Type: "3D_CT" doi: 10.18563/m3.sf.1662   state:published	Download CT data

Protosilvestria sculpta NMB F1989 View specimen

	M3#1463 Telson with 13 segments and the digestive tract Type: "3D_surfaces" doi: 10.18563/m3.sf.1463   state:published	Download 3D surface file
	M3#1663 CT data of NMB F1989 Type: "3D_CT" doi: 10.18563/m3.sf.1663   state:published	Download CT data

Protosilvestria sculpta NMB F1990 View specimen

	M3#1464 Eight segments and the telson Type: "3D_surfaces" doi: 10.18563/m3.sf.1464   state:published	Download 3D surface file
	M3#1664 CT data of NMB F1990 Type: "3D_CT" doi: 10.18563/m3.sf.1664   state:published	Download CT data

Protosilvestria sculpta NMB F3743 View specimen

	M3#1465 Seven segments and legs Type: "3D_surfaces" doi: 10.18563/m3.sf.1465   state:published	Download 3D surface file
	M3#1665 CT data of NMB F3743. Images were reduced by a binning of factor 2. Type: "3D_CT" doi: 10.18563/m3.sf.1665   state:published	Download CT data

Protosilvestria sculpta UM-SND-1704 View specimen

	M3#1468 Head and seven segments Type: "3D_surfaces" doi: 10.18563/m3.sf.1468   state:published	Download 3D surface file
	M3#1666 CT data of UM-SND-1704. Images were reduced by a binning of factor 2. Type: "3D_CT" doi: 10.18563/m3.sf.1666   state:published	Download CT data

Indet Indet UM-ROQ1-500 View specimen

	M3#1467 Head and ten segments Type: "3D_surfaces" doi: 10.18563/m3.sf.1467   state:published	Download 3D surface file
	M3#1667 CT data of UM-ROQ1-500. Images were reduced by a binning of factor 2. Type: "3D_CT" doi: 10.18563/m3.sf.1667   state:published	Download CT data

This contribution contains the 3D model(s) described and figured in the following publication: Da Cunha, L., Fabre, P.-H. & Hautier, L. (2024) Springhares, flying and flightless scaly-tailed squirrels (Anomaluromorpha, Rodentia) are the squirrely mouse: comparative anatomy of the masticatory musculature and its implications on the evolution of hystricomorphy in rodents. Journal of Anatomy, 244, 900–928.
  

Anomalurus derbianus 21804 View specimen

M3#1493 Masticatory apparatus of Anomalurus Type: "3D_surfaces" doi: 10.18563/m3.sf.1493   state:published

Download 3D surface file

Idiurus macrotis 29335 View specimen

M3#1492 Masticatory apparatus of Idiurus Type: "3D_surfaces" doi: 10.18563/m3.sf.1492   state:published

Download 3D surface file

Zenkerella insignis 5.5.23.27 View specimen

M3#1490 Masticatory apparatus of Zenkerella Type: "3D_surfaces" doi: 10.18563/m3.sf.1490   state:published

Download 3D surface file

Pedetes capensis NA View specimen

M3#1491 Masticatory apparatus of Pedetes Type: "3D_surfaces" doi: 10.18563/m3.sf.1491   state:published

Download 3D surface file

This contribution contains the three-dimensional models of the most informative fossil material attributed to both Peratherium musivum Gernelle, 2024, and Peratherium maximum (Crochet, 1979), respectively from early and middle early Eocene French localities. These specimens, which document the emergence of the relatively large peratheriines, were analyzed and discussed in: Gernelle et al. (2024), Dental morphology evolution in early peratheriines, including a new morphologically cryptic species and findings on the largest early Eocene European metatherian. https://doi.org/10.1080/08912963.2024.2403602
  

Peratherium musivum MNHN.F.SN122 View specimen

M3#1640 3D surface model of MNHN.F.SN122, right M3 Type: "3D_surfaces" doi: 10.18563/m3.sf.1640   state:published

Download 3D surface file

Peratherium musivum MNHN.F.RI220 View specimen

M3#1641 3D surface model of MNHN.F.RI220, left M2 (partial) Type: "3D_surfaces" doi: 10.18563/m3.sf.1641   state:published

Download 3D surface file

Peratherium musivum MNHN.F.RI296 View specimen

M3#1642 3D surface model of MNHN.F.RI296, right M1 (partial) Type: "3D_surfaces" doi: 10.18563/m3.sf.1642   state:published

Download 3D surface file

Peratherium musivum MNHN.F.RI368 View specimen

M3#1643 3D surface model of MNHN.F.RI368, right m2 Type: "3D_surfaces" doi: 10.18563/m3.sf.1643   state:published

Download 3D surface file

Peratherium musivum MNHN.F.RI385 View specimen

M3#1644 3D surface model of MNHN.F.RI385, left m1 Type: "3D_surfaces" doi: 10.18563/m3.sf.1644   state:published

Download 3D surface file

Peratherium maximum UM-BRI-17 View specimen

M3#1645 3D surface model of UM-BRI-17, right hemi-mandible with p1-p3, m1-m3 alveoli, and m4 Type: "3D_surfaces" doi: 10.18563/m3.sf.1645   state:published

Download 3D surface file

This contribution contains the 3D reconstruction of Canariomys bravoi, described and figured in the following publication: Michaux J., Hautier L., Hutterer R., Lebrun R., Guy F., García-Talavera F., 2012 : Body shape and life style of the extinct rodent Canariomys bravoi (Mammalia, Murinae) from Tenerife, Canary Islands (Spain). Comptes Rendus Palevol 11 (7), 485-494. DOI: 10.1016/j.crpv.2012.06.004
  

Canariomys bravoi TFMCV872-873 View specimen

M3#6 This file contains the 3D reconstruction of Canariomys bravoi, described and figured in the following publication: Michaux J., Hautier L., Hutterer R., Lebrun R., Guy F., García-Talavera F., 2012 : Body shape and life style of the extinct rodent Canariomys bravoi (Mammalia, Murinae) from Tenerife, Canary Islands (Spain). Comptes Rendus Palevol 11 (7), 485-494. Type: "3D_surfaces" doi: 10.18563/m3.sf6   state:published

Download 3D surface file

The present 3D Dataset contains the 3D models analyzed in: "a giant dapediid from the Late Triassic of Switzerland and insights into neopterygian phylogeny", Royal Society Open Science, https://doi.org/10.1098/rsos.180497 

Scopulipiscis saxciput PIMUZ A/I 3026 View specimen

	M3#177 3D surfaces of the skull and endocranial spaces inside neurocranium, including the aortic canal, braincase, fossa bridgei, lateral cranial canal, nerves and other passageways, notochord, posterior myodome, and right semicircular canals. Type: "3D_surfaces" doi: 10.18563/m3.sf.177   state:published	Download 3D surface file
	M3#178 Scan of the neurocranium of PIMUZ A/I 3026 Type: "3D_CT" doi: 10.18563/m3.sf.178   state:published	Download CT data

The present 3D Dataset contains the 3D model analyzed in the article : Dubied et al. (2021), Endocranium and ecology of Eurotherium theriodis, a European hyaenodont mammal from the Lutetian. Acta Palaeontologica Polonica 2021, https://doi.org/10.4202/app.00771.2020 

Eurotherium theriodis NMB.Em12 View specimen

	M3#381 NMB.Em12 unprepared specimen Type: "3D_surfaces" doi: 10.18563/m3.sf.381   state:published	Download 3D surface file
	M3#382 NMB.Em12 cranium Type: "3D_surfaces" doi: 10.18563/m3.sf.382   state:published	Download 3D surface file
	M3#383 NMB.Em12 endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.383   state:published	Download 3D surface file

The present 3D Dataset contains the 3D models of brain endocast of traversodontid cynodonts studied in: Pavanatto et al. 2019. Virtual reconstruction of cranial endocasts of traversodontid cynodonts (Eucynodontia: Gomphodontia) from the upper Triassic of Southern Brazil. Journal of Morphology. https://doi.org/10.1002/jmor.21029 

Siriusgnathus niemeyerorum CAPPA/UFSM 0032 View specimen

M3#425 3D model of the brain endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.425   state:published

Download 3D surface file

Exaeretodon riograndensis CAPPA/UFSM 0030 View specimen

M3#426 3D model of the brain endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.426   state:published

Download 3D surface file

Exaeretodon riograndensis CAPPA/UFSM 0227 View specimen

M3#427 3D model of the brain endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.427   state:published

Download 3D surface file

The present 3D Dataset contains the 3D model used in in the following publication: Interacting with the inaccessible: utilization of multimedia-based visual contents of Japan’s National Monument, the Taniwhasaurus mikasaensis (Mosasauridae) holotype for educational workshops at Mikasa City Museum. 

Taniwhasaurus mikasaensis MCM.M0009 View specimen

M3#499 Taniwhasaurus mikasaensis, Caldwell et al. 2008 Type: "3D_surfaces" doi: 10.18563/m3.sf.499   state:published

Download 3D surface file

The present 3D Dataset contains the 3D model of the brain endocast of Neoepiblema acreensis analyzed in “Small within the largest: Brain size and anatomy of the extinct Neoepiblema acreensis, a giant rodent from the Neotropics”. The 3D model was generated using CT-Scanning and techniques of virtual reconstruction.
  

Neoepiblema acreensis UFAC 4515 View specimen

M3#502 Brain endocast of Neoepiblema acreensis Type: "3D_surfaces" doi: 10.18563/m3.sf.502   state:published

Download 3D surface file

This contribution contains 3D models of the cranial skeleton and muscles in an elephantfish (Callorhinchus milii) and a catshark (Scyliorhinus canicula), based on synchrotron tomographic scans. These datasets were analyzed and described in Dearden et al. (2021) “The morphology and evolution of chondrichthyan cranial muscles: a digital dissection of the elephantfish Callorhinchus milii and the catshark Scyliorhinus canicula.” Journal of Anatomy. 

Callorhinchus milii 001 View specimen

M3#708 3D models of the cranial skeleton and muscles of Callorhinchus milii, created using Mimics. Type: "3D_surfaces" doi: 10.18563/m3.sf.708   state:published

Download 3D surface file

Scyliorhinus canicula 002 View specimen

M3#709 3D models of the cranial skeleton and muscles of Scyliorhinus canicula, created using Mimics. Type: "3D_surfaces" doi: 10.18563/m3.sf.709   state:published

Download 3D surface file

The present 3D dataset contains the 3D models of the holotype of Proterochampsa nodosa that were built and analysed in “Redescription, taxonomic revaluation, and phylogenetic affinities of Proterochampsa nodosa (Archosauriformes: Proterochampsidae), early Late Triassic of Candelaria Sequence (Santa Maria Supersequence)”. 

Proterochampsa nodosa MCP 1694-PV View specimen

M3#974 3D models of Proterochampsa nodosa. Model 1: skull. Model 2: mandible. Model 3: left mandibular ramus. Type: "3D_surfaces" doi: 10.18563/m3.sf.974   state:published

Download 3D surface file

The present 3D Dataset contains the 3D models analyzed in Benites-Palomino A., Velez-Juarbe J., Altamirano-Sierra A., Collareta A., Carrillo-Briceño J., and Urbina M. 2022. Sperm whales (Physeteroidea) from the Pisco Formation, Peru, and their Trophic role as fat-sources for Late Miocene sharks.
  

Scaphokogia cochlearis MUSM 978 View specimen

M3#977 juvenile Scaphokogia cochlearis Type: "3D_surfaces" doi: 10.18563/m3.sf.977   state:published

Download 3D surface file

The present 3D Dataset contains the 3D model of a skull analyzed in “A Puma concolor (Carnivora: Felidae) in the Middle-Late Holocene landscapes of the Brazilian Northeast (Bahia): submerged cave deposits and stable isotopes”. The 3D model was generated by photogrammetry. 

Puma concolor MN 57461 View specimen

M3#843 Cranium Type: "3D_surfaces" doi: 10.18563/m3.sf.843   state:published

Download 3D surface file

The present 3D Dataset contains the 3D model of a left dentary with m1-m3 analyzed in “A new fossil of Tayassuidae (Mammalia: Certartiodactyla) from the Pleistocene of northern Brazil”. The 3D model was generated using a laser scanning. 

cf. Pecari tajacu UFSM 11606 View specimen

M3#498 Left dentary with m1-m3 Type: "3D_surfaces" doi: 10.18563/m3.sf.498   state:published

Download 3D surface file